How do you unlock the configuration menu on Hayward Aqua Plus? Press the 'Menu' until, 'Configuration Menu-Locked' appears. To unlock, press and hold the (<) & (>) until the text, on the display, changes from 'Locked' to 'Unlocked' (unit will beep). Press the (>) repeatedly, until 'Chemistry Config.
What settings are available on the Aqua plus menu?
The chart below shows the Aqua Plus’s menus as well as each menu’s specific settings. denotes conditional items default menudayand time water temperature air temperature chlorinator setting
How do I lock in my Aqua plus settings?
After you have adjusted the item to the desired value, simply move on to the next menu item to “lock in” your new setting. The Aqua Plus memory will maintain the setting, even if power is removed for an extended period. Pool/Spa Filter Lights Aux 1 Menu> Aux 2 Service Salt Level 3200ppm Display “+” and “-” Buttons Menu Button
How do I unlock the configuration menu on my Hayward Aqua plus?
How do you unlock the configuration menu on Hayward Aqua Plus? Press the 'Menu' until, 'Configuration Menu-Locked' appears. To unlock, press and hold the (<) & (>) until the text, on the display, changes from 'Locked' to 'Unlocked' (unit will beep). Press the (>) repeatedly, until 'Chemistry Config.
How do I unlock Aqua logic configuration menu?
Press the 'Menu' until, 'Configuration Menu-Locked' appears. To unlock, press and hold the (<) & (>) until the text, on the display, changes from 'Locked' to 'Unlocked' (unit will beep). Press the (>) repeatedly, until 'Chemistry Config. Beside above, how do you reset Aqua Logic? Press the 'Menu' until, 'Default Menu' appears on the display.
How do you unlock the Aqua Plus configuration menu?
0:1810:31Programming - Basic Configuration - Aqua Plus and Pro Logic - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo unlock a configuration menu press and hold the left and right arrow button simultaneously forMoreTo unlock a configuration menu press and hold the left and right arrow button simultaneously for approximately 5 seconds. Then press the right arrow key to enter the configuration menu.
How do I lock my Hayward configuration menu?
0:110:56Hayward Super Pump VS - How To Unlock Configuration MenuYouTubeStart of suggested clipEnd of suggested clipHere you hit the menu button oh it's locked it says so you have to hit these two arrow buttons holdMoreHere you hit the menu button oh it's locked it says so you have to hit these two arrow buttons hold them down. Boom we are in to the configuration.
How do I unlock my Hayward Pool remote?
Unlock Configuration Menu To unlock the Configuration Menu, repeatedly press the Menu button until "Configuration Menu" is shown in the Menu Display. Press and hold the Menu Display for 5 seconds. Refer to your pool control's manual to determine what options are offered within the Configuration Menu.
How do I reset my aqua plus check system?
You must reset the system by entering the 'Diagnostic Menu' and then hitting the right arrow key once and then pushing the plus key once. This should reset the light and message.
How do I unlock my Hayward pool pump?
1:1211:44How To: Program A Hayward Super Pump VS - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I'll hit menu. And it's locked so you have to press these two arrows. And hold them down for aMoreSo I'll hit menu. And it's locked so you have to press these two arrows. And hold them down for a couple seconds. And then it's unlocked okay so I'll press the right arrow.
How do you troubleshoot a Hayward chlorinator?
How to Troubleshoot a Hayward ChlorinatorFour Hayward Models.Chlorine Concentration in the Pool Is Too Low.The Lid Is Hard to Tighten or It Leaks.The Control Valve Is Clogged.The Chlorinator Has an Air Lock.
How do I turn on Aqua Logic?
Turn power on at the main panel and turn the Aqua Logic control power circuit breaker on. The keypad will show the default display. The default display alternates between the day/time, air and pool (or spa) temperature, pool/spa sanitizer setting, and salt level.
How do I turn my Hayward remote into a hot tub?
0:006:21Pool remote instruction - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is a video to show how to use the pull remote if the screen is blank you press the menu buttonMoreThis is a video to show how to use the pull remote if the screen is blank you press the menu button to wake it up.
How do you use Aqua Pods?
Slide the Aqua Pod into the charging stand and charge for at least 5 hours before attempting to operate remotely. Charge the Aqua Pod at temperatures between 32ºF and 113ºF (0º - 45ºC). The Aqua Pod can be used while in the stand no matter what state the battery is in.
How do I reset my Hayward pool panel?
Reset AquaRite Salt Chlorination Inspect Cell Light If the Inspect Cell Light is the only LED light flashing, then you can reset it by simply holding down the diagnostic button for 3 seconds, then release. The Inspect Cell indicator will now reset and will later come back on after another 500 hours of use.
How do you recalibrate a salt generator?
1:022:17Recalibrating an Aquarite Salt Chlorine Generator - YouTubeYouTubeStart of suggested clipEnd of suggested clipPosition. Second step push the diagnostic button until a T number appears on the display. The thirdMorePosition. Second step push the diagnostic button until a T number appears on the display. The third and final step move the main switch from auto to super chlorinate and back to auto repeat.
How do I know if my Hayward Turbo is working?
1:373:54Is My Hayward AquaRite Salt Chlorine Generator Working? - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you can see it's it's bubbling. And it starts to get really turbid in there. And cloudy from theMoreAnd you can see it's it's bubbling. And it starts to get really turbid in there. And cloudy from the chlorine gas. That is a cell that is working beautifully.