How do you unlock the configuration menu on a Hayward pump? Press the 'Menu' until, 'Configuration Menu-Locked' appears. To unlock, press and hold the (<) & (>) until the text, on the display, changes from 'Locked' to 'Unlocked' (unit will beep).
How do I Reset my Hayward?
Oh, and most Hayward reset settings are in the config menu, unlocked by pressing menu until 'configuration: locked' is shown, then holding the left and right arrows for like, 5 seconds until it unlocks.
How do I unlock a locked configuration menu?
Press the 'Menu' until, 'Configuration Menu-Locked' appears. To unlock, press and hold the (<) & (>) until the text, on the display, changes from 'Locked' to 'Unlocked' (unit will beep).
Why are my Hayward lights not working?
You’ll have to confirm the reset after which the light setting returns back to its default mode. Apart from all this, one main issue associated with the Hayward lights is random light failure. This is usually caused by a voltage spike and it is advised that you call an electrician to examine your lines before installation.
What are the problems faced while using Hayward colorlogic pool lights?
This is usually caused by a voltage spike and it is advised that you call an electrician to examine your lines before installation. These are some problems faced while using the Hayward ColorLogic pool lights and you can be assured as they are nothing to worry about.
How do I unlock my Hayward configuration menu?
0:010:56Hayward Super Pump VS - How To Unlock Configuration MenuYouTubeStart of suggested clipEnd of suggested clipHere you hit the menu button oh it's locked it says so you have to hit these two arrow buttons holdMoreHere you hit the menu button oh it's locked it says so you have to hit these two arrow buttons hold them down. Boom we are in to the configuration.
How do I unlock my Hayward pool pump?
1:1211:44How To: Program A Hayward Super Pump VS - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I'll hit menu. And it's locked so you have to press these two arrows. And hold them down for aMoreSo I'll hit menu. And it's locked so you have to press these two arrows. And hold them down for a couple seconds. And then it's unlocked okay so I'll press the right arrow.
How do I lock a configuration menu in aqualogic?
0:1510:31Programming - Basic Configuration - Aqua Plus and Pro Logic - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo view and edit the configuration menu press the menu button until configuration menu locked isMoreTo view and edit the configuration menu press the menu button until configuration menu locked is shown on the display. This menu is locked to prevent tampering with the settings.
How do you reset the logic on a Hayward Pro?
You must reset the system by entering the 'Diagnostic Menu' and then hitting the right arrow key once and then pushing the plus key once. This should reset the light and message.
How do I lock the configuration menu on Hayward Pro Logic?
0:1610:18ProLogic: Programming Basic Configuration - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress the menu button until configuration menu locked is shown on the display. This menu is lockedMorePress the menu button until configuration menu locked is shown on the display. This menu is locked to prevent tampering with the settings. It is the only locked menu on the ProLogic.
How do I reset my Hayward EcoStar pump?
To manually clear, shut off the breaker supplying the EcoStar with power for at least 1 minute, then restore power.
How do you calibrate a Hayward Prologic salt cell?
0:393:09ProLogic: Programming Diagnostics - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress the plus or minus button to switch the cell polarity. The system will take 15 seconds toMorePress the plus or minus button to switch the cell polarity. The system will take 15 seconds to switch polarity. Press the right-arrow button instant salt will be displayed.
What does chlorinator off no cell power mean?
'No Cell Power' means the current chlorinator cycle has been interrupted due to no voltage being detected when the cell power relay was turned on. Page 4. Turn off power to the controller.
How do you reset the salt level on a Hayward Aqua Logic?
With the pump running, take the power switch down to the “Off” position, and then back up to “Auto”. You should hear a click within 10 or 15 seconds. When you do, press the diagnostic button five times in a row. The system will go through a recalibration process.
How do I reset my Hayward chlorinator?
0:321:31Chlorinator reset. Having electrical issues with your Hayward unit. Pure ...YouTubeStart of suggested clipEnd of suggested clipThing press and hold the up and down button that will give it a reset that's going to fix a lot ofMoreThing press and hold the up and down button that will give it a reset that's going to fix a lot of those little electrical gremlin problems get you going.
How do I reset my Hayward omnilogic?
Fixing Common Problems with Hayward OmnilogicTurn off power at the breaker.Wait 5 minutes.Turn power back on and let the system reboot.
How do I reset my Hayward AquaRite?
To reset, move the switch to 'Off' and then back to 'Auto'. Wait for the relay to click (5 to 10 seconds). When the instant salt level is stable (and the negative sign still present), slide switch to 'Super Chlorinate' and back to 'Auto'. It takes about 30 seconds for the unit to settle back on the default reading.
SWG Cell Basic Diagnostics
Report all readings when you.. Go to the diagnostic screen, note the readings and then press the + button to reverse the polarity. When the new numbers appear, see what they are. Then, press + again and note the new readings.
Configuration Menu-Locked
Press the ‘Menu’ until, ‘Configuration Menu-Locked’ appears. To unlock, press and hold the (<) & (>) keys until the text on the display changes from ‘Locked’ to ‘Unlocked’.
Freeze Protection
The freeze protection temperature is adjustable from 33º F to 42º F (38ºF is the default). Go to configuration and set freeze temperature as you like. Unlock configuration by pressing < > at the same time for 10 seconds.
CMS comm error
The CSM (Chemistry Sensing Module) comm error appears when Sense & Dispense is enabled, but the Chemistry Sensing Module is not found.
Buttons Become Unresponsive
Usually when the buttons become unresponsive the fix is to replace the display board. Before you buy a new board you can try this repair sort of under Murphy's Laws....go ahead and try it, if you break it you had to replace it anyway:
ProLogic Cavitation Alarm
When connected to a variable speed pump (VSP), a ProLogic will display Error Code: 80 if the VSP detects pump cavitation.
What is Hayward ColorLogic 2021?
posted on April 6, 2021. Pool owners are quite familiar with the Hayward ColorLogic pool lights. They brighten up the pool in the dark which is very essential in preventing pool accidents. These lights are actually pretty costly and buyers are generally dissatisfied when an issue arises with their lights. This can be a disappointment as they expect ...
Where is the resync icon on the UCL light?
Then click on the body of water the lights are connected with. After that, you should try locating the resync icon which should be at the lower right corner.
Can you reset your lights to default?
You can easily reset your lights to default using this method if you are making use of network lights, network couplers, network modules, a ProLogic with a software equivalent or higher than 4.10.
Where can I get a copy of the owner's manual?
Click here to see the complete list of manuals that are available for both the Pro Logic™ systems and accessory products.
How much salt does the system require?
The Aqua Rite™ works best with approximately 3200 ppm salt, which is roughly the equivalent to a teaspoon per gallon. However, the Aqua Rite™ will operate with salt levels anywhere from 2700 ppm to 3400 ppm.
Will the water taste salty?
Generally you should not be able to taste any salt in the pool because the level of salt in the water is so low, however some people with sensitive palates might detect a small amount of salt.
Why use electronic chlorination over traditional chlorine?
Traditional chlorine ties up with wastes in the water creating what are called chloramines. Electronic chlorinators continuously oxidize the chloramines and create "Free Chlorine". Chloramines are what cause common side affects associated with chlorine such as irritation to eyes and skin, bleaching of bathing suits, and that awful chlorine smell.