Check-Menus.com

kenwood ts 870 hidden menu

by Dario Oberbrunner Published 2 years ago Updated 2 years ago
image

The Service Adjustment Mode Menu is a hidden menu. OPERATION PROCEDURE Connect a >100W 50 Ohms dummy load to the antenna terminal Hold down the [N.R.] and [LSB/USB] key (together) and turn the [POWER] switch ON to enter the adjustment mode. The menu number will appear in M.CH on the display

Full Answer

What are the features of the Kenwood TS 870s?

Also built in as standard are a K1 logikeyer for the dedicated cw operator, an auto atu which covers both tx and rx, plus an RS-232 adaptor internally. Kenwood may also be able to supply a windows based control program in the near future. TS 870S SPECIFICATION.

Does the Kenwood ts870 have an external receive antenna?

07-05-2000TS870 external receive antenna switching Author:Yuri Blanarovich - K3BU -[email protected] Kenwood TS870 has two antenna jacks ANT1 and ANT2 and external receiver antenna jack (RCA type) that can accommodate external receiver when activated through the program menu.

How do I perform a CPU reset on a Kenwood ts870?

Reassemble and then perform the cpu reset by holding the A=B button depressed as power is turned on. The Kenwood TS870 radio has a fully digital signal path. All filtering, both in terms of width and noise reduction, is acheived digitally, so there are no optional analogue filters!

How to use the RF-Board on a ts870?

But using lower output its more sensitive and therefor more effective. Turn your TS870 on its head (foots up) and remove the cover. If the display is looking into your direction, the big curcuit board on the left-hand-side (underneath an additional metallic shielding) is the RF-board.

image

KW TS-450S Hidden Menu

power it on, an undocumented menu is accessed. This menu has 17 items and

KW TS-450S Hidden Menu

power it on, an undocumented menu is accessed. This menu has 17 items and

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9