How do you unlock the configuration menu on a Hayward pump?
- STEP 1: Unlock configuration menu.
- STEP 2: Change clock setting.
- STEP 3: Press the mode button to set the start time.
- STEP 4: Press the mode button to set shutoff time.
- STEP 5: Press the mode button to save timer settings.
How do I unlock the configuration menu on my Hayward Aqua plus?
How do you unlock the configuration menu on Hayward Aqua Plus? Press the 'Menu' until, 'Configuration Menu-Locked' appears. To unlock, press and hold the (<) & (>) until the text, on the display, changes from 'Locked' to 'Unlocked' (unit will beep). Press the (>) repeatedly, until 'Chemistry Config.
How do I set the clock on my Hayward pool pump?
How do I set the time on my Hayward pool pump? STEP 1: Unlock configuration menu. STEP 2: Change clock setting. STEP 3: Press the mode button to set the start time. STEP 4: Press the mode button to set shutoff time. STEP 5: Press the mode button to save timer settings.
How to unlock the configuration menu-locked mode?
Step 1 Press the Menu until, Configuration Menu-Locked appears. To unlock, press and hold the (<) & (>) until the text, on the display, changes from Locked to Unlocked ~unit will beep.
How do I unlock the configuration menu on my HPLC?
Press the 'Menu' until, 'Configuration Menu-Locked' appears. To unlock, press and hold the (<) & (>) until the text, on the display, changes from 'Locked' to 'Unlocked' (unit will beep). Press the (>) repeatedly, until 'Chemistry Config.
How do you unlock the configuration on a Hayward pump?
Press the 'Menu' until, 'Configuration Menu-Locked' appears. To unlock, press and hold the (<) & (>) until the text, on the display, changes from 'Locked' to 'Unlocked' (unit will beep).
How do you unlock the configuration menu on Hayward Ecostar?
0:010:56Hayward Super Pump VS - How To Unlock Configuration MenuYouTubeStart of suggested clipEnd of suggested clipHere you hit the menu button oh it's locked it says so you have to hit these two arrow buttons holdMoreHere you hit the menu button oh it's locked it says so you have to hit these two arrow buttons hold them down. Boom we are in to the configuration.
How do I lock the configuration menu on Hayward Pro Logic?
0:0610:31Programming - Basic Configuration - Aqua Plus and Pro Logic - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo view and edit the configuration menu press the menu button until configuration menu locked isMoreTo view and edit the configuration menu press the menu button until configuration menu locked is shown on the display. This menu is locked to prevent tampering with the settings.
How do I reset my Hayward EcoStar pump?
According to the Hayward EcoStar user manual, all errors can be reset by pressing "Stop/Resume" when the error message is shown. You can also clear the code by cycling power applied to the pump after the error occurs.
How do I change the speed on my Hayward pool pump?
6:1813:39Hayward Variable Speed Pump Programming How To.. - YouTubeYouTubeStart of suggested clipEnd of suggested clipPool okay we're gonna choose seven days a week on here you can choose different days you know. SoMorePool okay we're gonna choose seven days a week on here you can choose different days you know. So you can change this one day at a time or. And stuff like that so we're gonna leave that at seven days
How do you reset the logic on a Hayward Pro?
You must reset the system by entering the 'Diagnostic Menu' and then hitting the right arrow key once and then pushing the plus key once. This should reset the light and message.
How do you recalibrate Hayward Aqua Plus?
With the pump running, take the power switch down to the “Off” position, and then back up to “Auto”. You should hear a click within 10 or 15 seconds. When you do, press the diagnostic button five times in a row. The system will go through a recalibration process.
How do I use my Hayward Pro Logic?
3:4510:18ProLogic: Programming Basic Configuration - YouTubeYouTubeStart of suggested clipEnd of suggested clipPressing the plus key will change the bottom line of the display to read auto-sensing. This functionMorePressing the plus key will change the bottom line of the display to read auto-sensing. This function is used to allow sense and dispense to monitor pH levels in the water and to turn on reduction.
How to set timer on Hayward pool pump?
STEP 1: Unlock configuration menu. STEP 2: Change clock setting. STEP 3: Press the mode button to set the start time. STEP 4: Press the mode button to set shutoff time. STEP 5: Press the mode button to save timer settings.
How to turn on Hayward chlorinator?
Beside this, how do you turn on a Hayward chlorinator? Open the top lid of the chlorinator by turning it counter clockwise. (Hayward chlorinators depress the locking tab). Fill with slow dissolving jumbo tabs (3” pucks) or sticks. If possible use plastic disposable gloves.
How to reset filter pump?
Turn the filter pump on. You must reset the system by entering the 'Diagnostic Menu' and then hitting the right arrow key once and then pushing the plus key once. This should reset the light and message.
How to reset an inspect cell?
Press the 'Menu' until, 'Default Menu' appears on the display. This menu is where the 'Inspect Cell' message is stored. Press the (>) key , repeatedly, until 'Inspect Cell, Hold + to reset' appears on the display.
When does a pool reset?
be reset after initial start up, after a board replacement, following major pool
How to adjust the water level in a second body of water?
For the second body of water, use the (+) or (-) key to adjust the
What is Hayward warranty?
LIMITED WARRANTY (effective 03/01/12) Hayward warrants its Pro Logic, OnCommand and E- Command pool automation products as well as its Aqua Rite, Aqua Rite Pro, Aqua Plus and SwimPure chlorination products to be free of defects in materials and workmanship, under normal use and service, for a period of three (3) years. Hayward also warrants its Aqua Trol chlorination products to be free of defects in materials and workmanship, under normal use and service for a period of one (1) year. These warranties are applicable from the initial date of purchase on private residential swimming pools in the US and Canada. Installations of product for use on commercial pools in the US and Canada is covered for a period of one (1) year for defects in materials and workmanship. Hayward warrants all accessories and replacement parts for the above-identified pool automation and chlorination products for a period of one (1) year. Accessories also include remotes, actuators, base stations, temperature sensors, flow switches and chemistry probes. Each of these warranties is not transferable and applies only to the original owner. Hayward shall not be responsible for cartage, removal, repair or installation labor or any other such costs incurred in obtaining warranty replacements or repair. Proof of purchase is required for warranty service. If written proof of purchase is not provided, the manufacturing date code will be the sole determinant of the date of installation of the product. To obtain warranty service or repair, please contact the place of purchase or the nearest Hayward authorized warranty service center. For more information on authorized service centers please contact the Hayward Technical Service Support Center (61 Whitecap Road, North Kingstown RI, 02852) or visit the Hayward web site at www.hayward.com.
How to service a pool system?
To enter service mode, push the SERVICE button once on the main unit keypad. This will initially turn all outputs off and then allow you to turn outputs on/off manually at the main display (only). In service mode, the buttons on the optional spa side remote will turn outputs off, but will not turn any output on. Heater control outputs and solar control outputs are prevented from turning on if the water temperature exceeds 104ºF (40ºC). Pushing the SERVICE button again will enter a timed service mode. Service operation as described above will continue for 3 hours, then automatically return to normal operation. Push the SERVICE button once more to exit out of Service mode.
What to know before starting an on command?
Before starting the OnCommand for the first time, be sure that the following items have been completed: 1. Properly rated circuit breakers are installed in the OnCommand subpanel. 2. All wiring is performed according to NEC and local codes. 3. The OnCommand is properly grounded and bonded. 4. The OnCommand is properly configured to control all desired functions.
How to install AQL2 base station?
The AQL2-BASE-RF base station must be installed if the AQL2-SS-RF or AQL2-POD will be used. To install the base station , remove the middle knockout on the left side of the OnCommand main control unit, insert the base station, and then tighten the nut from the inside. Also refer to the Base Station installation manual and the diagram on page 13.
How far away from a pool can you mount an on command?
The control must be mounted a minimum of 5 ft. (2 meters) horizontal distance from the pool/spa (or more, if local codes require). The OnCommand is designed to mount on a flat surface with the knockouts facing downward. When selecting a location, note that the standard cables supplied with the temperature sensors, and valve actuators (if applicable) are all 15 ft. (5m) long.
What is AQL2 POD?
The AQL2-POD is a full function rechargeable handheld remote with display. It offers the same control options asthe local display/keypad. This waterproof portable remote is designed to be used in and around the pool/spa area.
How many sensors are included in an OnCommand?
Three sensors are included with the OnCommand. A water sensor and an air sensor must be installed at all timesfor proper operation. A solar sensor is required if the solar function is enabled.
